E
emkay4
·Guest
Joined
·
0 Posts
I remember when I first sat inside a supra it wa back in 93' In the amityville toyota dealer and I was like damn, parents had to yank me outta the car, well here I am.
Im new!!
1 - 2 of 2 Posts
S
StaticX313
·Guest
Joined
·
0 Posts
Welcome fellow newb 
RoB~
RoB~
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Synchrotech V160 parts question
MKIV (1993-1998)Hey guys, has anyone used any of these Synchrotech components in their V160 rebuild? Just trying to see if its comparable or better than oem. http://shop.synchrotech-transmissions.com/V160-Supra-Skyline-3S_c60.htm;jsessionid=2341AB9FE706C4F968D7430AFCA43CE6.p3plqscsfapp002- 11
- 2K
-
zupar1187 · updated
-
NEED HELP!! Differential Question
MKIV (1993-1998)Okay I’m about ready to smash my head into the wall. Can anyone tell me if there is anyone who makes a different ratio ring and pinion for the 200mm diff. I recently took the diff out of my car to fix a leaky seal. When I bought the car I was told it was a full turbo conversion but I felt that...- 17
- 195
-
TRD3000GT Cars
MKIV (1993-1998)I compiled a list of all know cars and their vins , I have been working on this last 13 years when I obtain a TRD3000GT , very difficult to get any information on them How to read the TRD VIN Model Serial # Year Month Factory Some context , based on the TRD2000GT (SW20 MR2) I was able to...- 6
- 162
-
Can you guys Help me find this part? on the driver side Door panel
MKIV (1993-1998)Hey guys, I have a converted LHD car and the driver side panel has a trim that is different than the US spec ones. The piece I circle is 1 piece instead of 2 in the JDM door. The switch panel is completely broken and doesn't hold the switch anymore so I am trying to get the US driver side...- 5
- 94
-
ThaBigHuynh · updated
-
Safe to go "All In" on stock Top/Bottom GTE VVTi with Gen1 GTX3582R?
MKIV (1993-1998)Hello, I'm in the middle of building my 240sx swapped GTE VVTi. Motor is going to be completely stock unopened and using stock IM. I'm having my T4 divided twin 38mm gate manifold made now and will be running a Gen1 GTX3582R with a T4 divided 1.06 housing. Been doing a lot of reading and...- 17
- 902
Join now to ask and comment!