ive been hearing so much bad stuff about ST people on the forums say its not much of a drop, well so i got my front springs in today. It looks like a very good drop compared to stock. suspension techniques were cheap . oh yah this $1000 dollar project supra so far i dumped $400 worth of parts
Drop is not good enough (IMO) for 16" rims. You need at least 17" rims for the ST's to look good. And that is to bad because I was going to order them, but I guess not anymore. Thanks for the pics.
i would like to see what they look like with the rears on too, considering i have a set sitting next to me in a box at the moment.....i really need to get my car done
i was searching for it and couldnt find it, only could remember the file name i saved it as.
so i searched google for "mark7m001"
first result was....
http://www.phonezoo.com/ContentProfile.do;jsessionid=DD5E829BA526D565A2A4B8A1159571E9?id=84412809
someone made it a ringtone! named "crunk...
Ok guys I got my block back from rebuild, Cp pistons 10:1 .020 over, stock rods, standard rod bearing, stock head, arp studs. 1.5mm cometic hg. 2jzge head got new valve seals put in. I got everyting put together and it fired up. When it idles and rev up, no knocking or tapping noise, but...
If for whatever reason you don't wanna read, the actual questions are underlined.
Hey all, I've been wanting to get a MK3 for quite a while now. Personally just like the 80's body style more (and hey, it's cheaper :D). I have a couple of questions, first to start is that I do want to get a...
Hey guys my names triz
I’m looking to buy a 1989 Toyota Supra turbo 155k (automatic..... I know I know, but I can’t find a 5 speed not even N/A my plan is to do a 5 speed swap myself)
I was hoping for some help I don’t exactly know what I should be looking for, and I was hoping you guys could...
1988 mk3 Supra 7mgte auto, almost 120,000 miles
Runs good but smokes very bad especially after boost. New head gasket and had the head redone and machined 1000 miles ago. compression tested and 5 were 150-180 psi and the 1st cylinder was 120 psi being the lowest.
So my question is what could...
. oh yah this $1000 dollar project supra so far i dumped $400 worth of parts 
