Supra Forums banner
1 - 4 of 4 Posts

Discussion Starter · #1 ·
I have a TurboXS MBC, and I want to put it on my car. I would assume it goes on the vacume line between the front turbo and the wastegate actuator.

Currently I am running the car with the vacume line pulled off of the VSV running to the wastegate actuator.

Do I just install the MBC where I mentioned above and leave that hose pulled going from the VSV to the wastegate actuator off, or am I totally wrong about this?

Thanks alot

Premium Member
3,148 Posts
You should run one hose from the turbo (the one that goes from your turbo to the VSV currently. And the other hose should go from your MBC to the actuator. The other nipple on the actuator should be capped.

Later, Steve
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.