Intake dimensions/help???
Can anyone provide the following information for a MKIV intale system(i.e., Blitz SUS, Greddy Airnix, HKS Super Mega Flow)?
1. Type of intake.
2. How long the overall pipe is minus the filter.
3. The diameter of the intake pipe.
4. How many bends in the pipe.
5. Approximately where in the length of the pipe does the bend occur. For instance, if overall pipe length is 30 inches and there are two bends, does the first bend happen 3 inches from the filter and the second bend happen 25 inches from filter.
Thanks,
Mike
1. Type of intake.
2. How long the overall pipe is minus the filter.
3. The diameter of the intake pipe.
4. How many bends in the pipe.
5. Approximately where in the length of the pipe does the bend occur. For instance, if overall pipe length is 30 inches and there are two bends, does the first bend happen 3 inches from the filter and the second bend happen 25 inches from filter.
Thanks,
Mike
1 - 1 of 1 Posts
1 - 1 of 1 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Supra Forums
Supra Forums is the largest online Toyota Supra MKI, MKII, MKIII, MKIV and MKV owner's club community. Discuss DIY, modifications, and upgrades.
Full Forum Listing
Explore Our Forums
