interior leds
1 - 12 of 12 Posts
Joined
·
327 Posts
LEDs are very simple to change. You just need to pull out your factory gauges, and whatever else you have lit up with LEDs, and do the switch. If you have any ability to work with electronics, it shouldnt be difficult. You just need to be careful, as with all electronics.
Joined
·
2,173 Posts
Joined
·
12,497 Posts
LED's are simple to change if you have a direct replacement for them. but there arent any simple replacements that work for our cars. And if you arent familiar with electricity then you are gonna just fuk up everything. The only thing in our cars that use LED's anyways are the HVAC controls. But there are also still bulbs in there as well, and everything else uses bulbs.
Alex
Alex
Joined
·
366 Posts
http://www.supraforums.com/forum/showthread.php?t=365592&page=1
Yeah, if you look down the forum a few inches you would see the thread about dash LEDs. You dont even need to use search.
In short, the bulbs in the back of the tach and speedo can be changed out for LEDs. You just need the three 194 wedge LED and one 74 LED (you can pick em up off ebay for 9 bucks for a pair). As for the AC controls and whatnot, it can be very tricky and is not a simple 5 sec swap.
Yeah, if you look down the forum a few inches you would see the thread about dash LEDs. You dont even need to use search.
In short, the bulbs in the back of the tach and speedo can be changed out for LEDs. You just need the three 194 wedge LED and one 74 LED (you can pick em up off ebay for 9 bucks for a pair). As for the AC controls and whatnot, it can be very tricky and is not a simple 5 sec swap.
Joined
·
12,697 Posts
Joined
·
3,676 Posts
y dont u just change the greddy gauge color instead of chaning ALL the other ones .. :dunno:
1 - 12 of 12 Posts
