Joined
·
3,148 Posts
Listed under the parts for sale section.
Later, Steve
Later, Steve
Kenwood/a/d/s custom stereo and for sale
1 - 1 of 1 Posts
1 - 1 of 1 Posts
Join the discussion
Recommended Reading
-
Zledslights Supra Stage 3 Taillights
Mobile Electronics (I.C.E.) and LightingJust wanted to share a good experience I had with a great guy who operates Zledslights.com . Guy makes a cool all inhouse built product. He is light years past the likes of "toxictails" and "prospec imports" replacement leds. He builds all of his own boards, programs the controllers, has a...- 9
- 915
-
FasTTurbo · updated
-
Help!!!Electrical Experts....
Mobile Electronics (I.C.E.) and LightingI switched out the key cylinder halogen T5 bulb to an LED one & it was ok for a few seconds then it flickered then died. Now I have no power at that bulb socket! Did the low power associated with the LED bulb somehow burn up something inside the integration relay??? My dome light & all...- 3
- 136
-
THILC · updated
-
What amps are you using?
Mobile Electronics (I.C.E.) and LightingHey guys, What amps are you guys currently using? Something that fits in the stock location under the passenger seat would be ideal. Also, one amp for everything would be preferred as well. Thanks! EDIT: Thanks guys! I found a JL 900/5 for sale that I managed to scoop up. Time to find some...- 14
- 438
-
How to calibrate a custom 180km/h to 320km/h Speedo dial in JDM MKIV Supra?
Mobile Electronics (I.C.E.) and LightingHi all, I am based in New Zealand and I have bought a new speedo dial that looks like the TRD one. Sending my cluster internationally to someone is not economically viable for me at the moment and I cannot find anyone to do this locally. How would I go about calibrating my car to suit the 320km...- 0
- 102
-
Bawse.C · updated
-
S2K Projector Retrofit Pictures
Mobile Electronics (I.C.E.) and LightingRecently I was contacted about retrofitting Honda S2000 projectors into MKIV Supra headlights. I was happy to oblige provided the customer supplied me with a set of projectors. The following are some pictures of the method that I used. The first thing that was required was to trim the projector...- 26
- 8K
Join now to ask and comment!