Lean due to adjusting cam gears. | Supra Forums

1 - 1 of 1 Posts

namahs

·

parting out

Joined Sep 27, 2001

·

83 Posts

Discussion Starter • #1 • Nov 1, 2001

I just adjusted my exhaust cam gear to -3 degrees and my intake to +2 degrees. I noticed that my air fuel meter says im running lean. Is this the truth??? Now I cant get the air fuel meter to go rich even if I adjust the mix and puff black smoke. Could I have fouled the o2 sensor??

Please help, I cant boost until I fix this problem.........

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

HELP installing 272 Cams

MKIV Technical

After I have installed all the new seals, BCsprings, retainers, locks and buckets, with T-belt off, put crank at -10 btdc so all pistons are slightly down, install new BC 272 cams, install cam gears, torque cams as per manual. Then turn CAMS clockwise to tdc notches, and than turn CRANK to tdc...
- 6
- 138
- rallly · updated 7 hours ago
Brake caliper colours - post your pics!

MKIV Technical

I am about to repaint my brake calioers. I’m looking for ideas (my car is white). Post your pics - try and show your car color - and let’s see what’s out there. I will post after pics when I have some ideas. Sent from my iPhone using Tapatalk
- 5
- 202
- F
  fants · updated 13 hours ago
Supra MKIV JDM Brake Lines routing help!

MKIV Technical

Hi!! I need a little help!! Anyone knows the connection or the route of the brakes lines please? I Made this drawing. Thanks in advance.
- 8
- 3K
- lucassanabria · updated 20 hours ago
Rhd jza80 HID kit

MKIV Technical

Recently acquired a rhd supra and slowly starting the process of swapping things over. Got myself some glass headlights and wanted to swap bulbs while I’m at it. Been told jdm lights differ from usdm. Hard finding more info on this. Thoughts? Trying to find a quality hid system, seems LED isn’t...
- 3
- 220
- C
  cantdrift · updated 6 days ago
2JZ-GTE Igniter - Required when you go to a aftermarket harness + ECU

MKIV Technical

I came across asking myself today, do you need a igniter when you go to a aftermarket ECU and Harness? I noticed my friend is running a MOTEC and does not have one for his car.
- 2
- 279
- P
  PushLimits · updated 8 days ago

Join now to ask and comment!

Top