Supra Forums banner
1 - 1 of 1 Posts

· ma70-7m=1JZ
Joined
·
2,602 Posts
I would say unbolt it from the inside of the car and get some epoxy and glue the studs back on. The key is to sand the area with some 80 or 100 grit sand paper to roughen the surface up, other wise the epoxy wont stick well. If you really want it to stick epoxy it and use some 3M two way tape.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top