Supra Forums banner
1 - 5 of 5 Posts

·
Supranian
Joined
·
2,007 Posts
Discussion Starter · #1 ·
Which style RC Engineering injectors is everybody using on the MKIII. The ones I have are PL8-550 and I was wondering if I have the right ones??? Also, is there supposed to be a pintle cap on the bottom of them where they go into the head?

Can someone post a pic of one of these injectors, my camera is dead.
 

·
Registered
Joined
·
5,967 Posts
chriso said:
Which style RC Engineering injectors is everybody using on the MKIII. The ones I have are PL8-550 and I was wondering if I have the right ones??? Also, is there supposed to be a pintle cap on the bottom of them where they go into the head?

Can someone post a pic of one of these injectors, my camera is dead.

You want low impedence injectors for your car.

This what it looks like?
 

·
Supranian
Joined
·
2,007 Posts
Discussion Starter · #3 ·
Yup that's what mine look like but I just wanted to confirm the part number. I think I am alright though. Thanks again Moe. :ugh2:
 

·
Registered
Joined
·
899 Posts
Use a digital multi meter in ohms mode to read the resistance between the two pins on the injector. it should read like 2 or 3 ohms or something like that. High impedance injectors read in the double digits i believe.
 
1 - 5 of 5 Posts
Top