Supra Forums banner

1 - 6 of 6 Posts

·
Love teh white wimmenz!
Joined
·
320 Posts
Discussion Starter #1
Alright I'm about to remove my LCA to replace it with a fresh CA with good bushings. Is there any thing I need to know or any special tools I would need to re-install?
 

·
Registered
Joined
·
218 Posts
I hope you're adjustment bolts come out. I had to cut my LCA off and install new bolts. I even tried a ball joint press and the body started to rip instead of the bolts moving.
 

·
Love teh white wimmenz!
Joined
·
320 Posts
Discussion Starter #3
My adjustment bolts are loose as hell, the power steering fluid ruined my original bushings and now there just spinning back and forth.
 

·
Registered
Joined
·
5,110 Posts
I love living in Texas. I don't know why they bothered to put undercoating on my car. I recently replaced a lower control arm and it's all straightforward, just be sure to get an alignment.
 

·
Love teh white wimmenz!
Joined
·
320 Posts
Discussion Starter #6
An alignment is exactly what I need, the tires are eating away on the outside edges on the passenger side. The shop said I needed a new LCA cuz the bushings were bad, so I got one for 20 bucks off ebay, still good. They tried chargin me 1200 for labor and new LCA.
 
1 - 6 of 6 Posts
Top