Supra Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
255 Posts
Discussion Starter · #1 ·
Hey guys,

Approximately 2 years ago I performed a manual conversion on a JDM 1995 GZ Supra, everything has been great besides the fact that cruise control has stopped working ever since I did the conversion.

Now it's obvious to me that I have not spliced the wires from the loom to the manual box, if someone can shed some light on a guide or something similar this would be very much appreciated!
 
1 - 2 of 2 Posts
Top