Supra Forums banner

1 - 11 of 11 Posts

·
The Boost Machine
Joined
·
490 Posts
Discussion Starter #1
Does anyone know if any of the aftermarket TT downpipes/midpipes fit the NA?
My stock main cat is shot and would like to go straight pipe.
By the way, I'm now going to be NA-T.
I need some assistance PDQ, so my project can be completed.
Any help/information would be greatly appreciated.

Thanks,

David
 

·
Found E85 NOT in NJ!
Joined
·
5,253 Posts
well, i ran into the same problem when i got my turbo set up

it really depends on what kind of turbo you have and everything

i used the TT downpipe because my turbo setup had a short downpipe and that was all i needed to connect it. I also had a high performance cat installed. All i had to do was check the size and postion and mark off where to cut and weld because my dad's friend did the welding for free

www.boostwerx.com has a picture of the short downpipe
 

·
The Boost Machine
Joined
·
490 Posts
Discussion Starter #3
well, i ran into the same problem when i got my turbo set up

it really depends on what kind of turbo you have and everything

i used the TT downpipe because my turbo setup had a short downpipe and that was all i needed to connect it. I also had a high performance cat installed. All i had to do was check the size and postion and mark off where to cut and weld because my dad's friend did the welding for free

www.boostwerx.com has a picture of the short downpipe
I have a very similiar setup to Dave's kit.
So if no cat was used/welded would it have bolted right up?
I'm looking at a setup from Random tech with highflow cat.
Any Idea from pic if it will bolt up?


Thanks,

David
 

·
2JZ-Phantom
Joined
·
2,117 Posts
The midpipe will bolt up but the downpipe I am not sure about. If you are using the manifolds similar to the TT's then the downpipe should work.
 

·
The Boost Machine
Joined
·
490 Posts
Discussion Starter #6 (Edited)
i got from boost logic it's great bolted right up
Did your pipe come with the boostlogic turbo kit?
Did it have a 02 bung welded on it?

I'm looking at Blitz, HKS midpipe or boostlogic's.
Anyone have a price?

Thanks,

David
 

·
Master Yos
Joined
·
2,215 Posts
no i do not have a boost logic kit but most of the parts are from them i order my from them i think i piad $280.00. and yea my car was obd2 but that sensor down there you dont need it i had it off the check engine light never when on now i have aem ems so i got no o2 sensors
 

·
The Boost Machine
Joined
·
490 Posts
Discussion Starter #8
no i do not have a boost logic kit but most of the parts are from them i order my from them i think i piad $280.00. and yea my car was obd2 but that sensor down there you dont need it i had it off the check engine light never when on now i have aem ems so i got no o2 sensors
Thanks,

So did the boostlogic midpipe come with the 02 bung or not?
I'm ODB1. I think I need it.

David
 

·
Found E85 NOT in NJ!
Joined
·
5,253 Posts
basically, is you look at the TT downpipe, all i had to do was cut off the flange and the welder guy welded it together

he played it a little safe and put another bend on it but that was just to be safe
 

·
The Boost Machine
Joined
·
490 Posts
Discussion Starter #10
basically, is you look at the TT downpipe, all i had to do was cut off the flange and the welder guy welded it together

he played it a little safe and put another bend on it but that was just to be safe
Understood, I'm just trying to find a non custom way of doing this if at all possible though. If I can save a little $$$ all the better.
Just trying to see what works.
 
1 - 11 of 11 Posts
Top