O
osofast240
·Guest
Joined
·
0 Posts
Why does that supra have tin in the engine bay?
mvp supra
1 - 5 of 5 Posts
Joined
·
4,417 Posts
osofast240 said:
Because Gold would have been just over-kill.
S
shervin
·Guest
Joined
·
0 Posts
I think it was something to do with reinforcing the engine to hold it in there tight...... im not sure... but with all that force you probably do need some upgraded material in the bay to hold that motor in place
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
Help me choose a 600whp turbo for 2jzgte
Dyno TuningI have searched and read for days and still cant make a decision my setup as follows 6 speed stock bottom end 272 HKS cams adjustable cam gears stock coils AEM v1 (subject to change to something newer) UPDATE new ECU ECUMaster 850cc injectors A1000 fuel pump Pump + methanol injection...- 66
- 3K
-
vovka · updated
-
1ZZ-FE Ignition Coil Install
Dyno TuningI've been getting some PM's about this setup so I thought I'd post some pictures now and update it later with results. I used ignition coils from an 04 Corolla which are "smart" coils with built in igniters. I ditched the stock igniter by soldering the wires together and wired in these coils...- 151
- 12K
-
Tres · updated
-
Flex Fuel Query
Dyno TuningMorning All, Quick question for your guys. I am over in Ireland, we do not have E85 available here on pump. The fuel available in the pumps here is 95. I do not know if that is RON or Octane. Any car I ever had was always just setup / mapped on pump fuel. My question here is if I have a flex...- 4
- 452
-
Dempsey · updated
-
1JZGTE Tuned by Alpha - 60mm BW + BC264 + E85
Dyno TuningGot my car(SC300) tuned by Alpha during his trip up to Unit 12 Motoring back in August, figured I should post the results. Stock 1JZGTE non-VVTI on AEM Infinity BC264 Cams GSC Springs & Ti Retainers Borg Warner S360 0.88 A/R T4 Single Scroll FIC 1200cc Injectors(In Sequential Injection) Single...- 2
- 286
-
Shooter · updated
-
setup recommendations after disappointing dyno tune
Dyno TuningI've owned my Supra for 15 years and took it to the dyno for the first time and was kind of disappointed with the numbers. Best I could do was 499.22HP on 19PSI. I know there are many different setups but I was expecting to get somewhere in the 550 range Fuel pressure was starting to drop at...- 23
- 2K
-
ophidicus · updated
Join now to ask and comment!