My 95 NA needs repair +power. Help? | Supra Forums

1 - 1 of 1 Posts

S

stabone

·

Guest

Joined Jan 1, 1970

·

0 Posts

Discussion Starter • #1 • Oct 16, 2001

I blew a piston ring on my 95 NA b/c of bad valve seal w/ oil leak and i want to gain power in the process of fixing it. What can I do with 5k? Here are some things I thought of:

1. Rebuild the motor w/ JE pistons/rings and fix valve seal
2. Do turbo conversion that includes the above too.
3. Buy new NA short block, fix seal.

Considering LABOR, what can I afford and who can do these jobs the best? Help me out please!

1 - 1 of 1 Posts

Recommended Reading

LSD recommendation?

MKIV Technical

I have been out of the scene for 8 years or so, and my '95 MKIV has been in storage for the last 6 years or so, but I am getting ready to bust her back out and get the beast rolling again. That said, when I put it in storage I knew I needed a LSD due to the turbo upgrade I gave it... but now the...
- 14
- 348
- S
  shonuff3589 · updated a moment ago
Overheating issue

MKIV Technical

So over the winter I installed a new mishimoto x-line radiator and the mishimoto dual fan shroud with fans, and a derale dual fan controller. It was great and didn’t overheat until the temperature started getting warm outside. Now driving on the freeway @ 70mph it’s starting to overheat. I’ve...
- 19
- 263
- NTLONUF · updated 2 h ago
New Wheel & Tire fitment guide.

MKIV Technical

Please send me an e-mail if you would like a copy of the spreadsheet. [email protected] Later, Steve
- 1K
- 236K
- Steve Jarvis · updated 4 h ago
Aem v2 auto 02v02 conversion to 01v24 fuel pump issue

MKIV Technical

Hello there, Conversion from 02v02 to 01v24 - after that fuel pump stop working If i go back to 02v02 works just fine Another thing - on 01v24 - If i plug only A ecu connector, pump works, but when i plug B ecu connector just stops Please help Thanks in advance
- 0
- 17
- E
  EdinRDrugB · updated 5 h ago
Coolant temp gauge sensor

MKIV Technical

So my on my 1993 supra with a 2jzgte, the temp gauge on the gauge cluster, just pinned to High. Even when the car is only warm. I unplug the single pin sensor and it drops back to cool. I ordered a new sensor and tried to install it, but the sensor threads are just a little to big for the...
- 0
- 38
- supratwnhks · updated 23 h ago