Supra Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
211 Posts
I've never done one but from what I understand it's always a good idea to swing your block and head by a machine shop while it's out. Sounds like you're doing a performance rebuildso bring it by there and they can give the head a quick shim and the block and they can tell you whether it needs it in the 1st place. But also might want to get the block bored out .02 or something, people say thats a good way to go on a rebuild.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top