Supra Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
1,400 Posts
Discussion Starter · #1 ·
Hmm I did a search, Instead of using the filter, is there another way to tap this into an existing hose that goes into the intake or intake manifold? I don't want to use a custom intake pipe if I don't have to, so I'm thinking of a T-tap or something, but dunno where. Thanks

Pics from Suprasonic's na-t tutorial


Custom Intake


posted on clubna-t.com too
 

·
miata owner...
Joined
·
1,367 Posts
Ravan17 said:
i like the way the catch cans clean up ure engine bay, im lookin into replacing my breather on my na-t too, it cracks from the heat all the ime and starts leaking oil

well you still put a breather on the catch. Example:

 

·
Registered
Joined
·
1,400 Posts
Discussion Starter · #7 ·
Ah I see

It makes a difference in California apparently -- some things will pass and other things won't. According to the dmv, some engine modifications are ok but a breather is not one of them.
 

·
Banned
Joined
·
1,533 Posts
I used to put a clear see-through fuel filter on it (just take out the fine mesh screen), when oil builds up just diconnect it (the other end of the hose; not connected to the engine), and lift it up, and the oil drains back into the engine
 

·
Registered
Joined
·
1,400 Posts
Discussion Starter · #9 ·
that's a good idea too just like a catch can to collect the build up
 

·
Registered
Joined
·
1,400 Posts
Discussion Starter · #10 ·
update:

yeah, no difference except visually relocated

 
1 - 10 of 10 Posts
Top