Supra Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
72 Posts
Discussion Starter · #1 ·
Hi,

I will be installing the PHR Stage 1 single turbo kit on my 1994 Supra TT this week. I was wondering if anyone has a map for this setup... I will be running on stock fuel and stock auto tranny.
Here's a list of my mods (most are installed.. the rest will be installed with the kit):
- Greddy 3-row
- HKSSBOV
- HKS DLI
- Greddy Profec-B
- HKS DLI-2
- AEM 3.5 bar map sensor
- AEM IAT sensor

Thanks in advance!
 

· Registered
Joined
·
930 Posts
if its not to late, use the latest AEM firmware and software. convert the base GM 3bar map for a 3.5 and use your WB02 and start tuning with boost set as low as possible. Also don’t try and set the timing as the manual says the base map is set up right.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top