Supra Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
594 Posts
Discussion Starter #1
just need a little help here...i saw the wheel/tire fitment guide and have to say that that's one of the most helpful things i've seen...well here my question goes...i'm getting the veilside fender flares and they say that the fender adds one inch to the overall width of the fender...so what is the wheel size that i'm suppose to get??? on the guide it says to get 18x11.5 with an offset of 45 for cutting the fender w/out hammering the frame in...well if that's the fact am i just suppose to get 18x12.5's in the rear with an offset of 45? and on the front i think i'm gonna put 18x10 with a 50 mm offset...and for tires i'm putting 265's on the front and 335's on the rear...can anyone help me out and tell if this is goin to work??? thanks
 

·
Moderator
Joined
·
3,148 Posts
The best fitment would probably be a 19x11" 40mm offset with a 305/25R19 front and a 19x12.5" 34mm offset with a 335/25R19 rear. You could also go with a 18x10.5" 36mm offset 295/30R18 front and 18x12.5" 34mm offset with a 335/30R18 rear. The 18" configuration will probably need a stiffer rear swaybar to keep the car balanced.

This assumes you are putting the fender lips on the front and rear fenders, and you will gain 1" in the front and rear.

Later, Steve
 
1 - 3 of 3 Posts
Top