Supra Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter · #1 ·
hi from france, and sorry for my english

i m rebuilding my main crank (brand and new), with my actually BC rod connecting 6309

for the moment i have that:

http://s329943585.onlinehome.fr/adrien/embiellage/cote moteur 2jz.jpg

the main crank, is in usa, and the bearing too, i have choose std size bearing, but i want be sur that is the good size


what you mean about that?
 

·
Registered
Joined
·
60 Posts
Discussion Starter · #2 ·
for the tolerance i have that:

Per Toyota Manual:

Connecting Rods:
Standard oil clearance 0.035-0.053 mm (0.0014-0.0021 in)
Maximum oil clearance 0.040-0.078 mm (0.0016-0.0031 in)

Mains:
Standard clearance 0.026-0.040 mm (0.0010-0.0016 in)
Max clearance 0.06 mm (0.0024 in)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top