Need LOW boost RWHP for T78

1 - 1 of 1 Posts

rnitto

Registered

Joined Mar 22, 2001

222 Posts

Discussion Starter • #1 • Dec 17, 2001

I am running the AFC,VPC, and stock IC and main cat (for now until I get my RMM modified) Can someone who has dynoed their T78 car w/ 8,14, and 16 psi give me some ball park figures. And how much RWHP can I be losing from the main cat/stock IC?
regards
Roger

1 - 1 of 1 Posts

Recommended Reading

Rear ABS sensors

MKIV Technical

Hi guys, During my subframe restoration I broke both of my rear abs sensors. They were seized in the hub. It seems they are impossible to find in Europe. I'm wondering if the sensors from another model fit the Supra. For example the sensors from the Rav4 and Yaris look almost identical in the...
- 2
- 137
- CasperMK2 · updated 17 m ago
Traction Control

MKIV Technical

Hi, Just traded for my first manual 94 Supra Twin. I checked all of the vin tags and confirmed it is a twin. My car does not come with the traction switch in the console. I'm not sure if the previous owner removed it or if it was an option for the dealer. Can anyone confirm if this?
- 2
- 58
- M
  Mynillas · updated 18 h ago
2jzgte vvti head porting, opinions please

MKIV Technical

Hi everyone, I’ve been reading supra forums for months and months now. Love this page, and this is my first post. I’m about to port my vvti head and I have some questions pertaining to the valve guides. So, assuming my guides are within spec (it’s a low mile motor), what are your professional...
- 2
- 113
- 2JZ GT86 · updated 22 h ago
Misfire issue, need some advice.

MKIV Technical

Note: Car was perfectly fine before it’s last wash getting it ready for a photo shoot.(engine bay was sprayed with water). So I’m driving to the photo shoot location and I start noticing a misfire. The longer I drove it progressively got worse to the point where I would just get pretty good...
- 0
- 60
- JustA2jz · updated 1 d ago
Banjo bolt on fuel pump won't budge - ok to use impact wrench?

MKIV Technical

Greetings, I'm having trouble removing the banjo bolt on the fuel pump assembly. Tried everything I could think of besides an impact wrench. Wanted to ask some folks if that was a good idea or not? I'd really appreciate any insight you can offer. To be clear and avoid miscommunication I found...
- 1
- 69
- R
  RushTurbo · updated 2 d ago