[GTE_SC3]

Hey, i know i searched but no one ever really posted this. I m going through a meatal gas tank cover an im running wires to the new 2denso pumps im wondering how do you go through the tank with out making sparks an igniting the fuel. any cool connector do you use. the stock 1 wire i dont think is big enough to support the 2 desno

Need some help

thanks chris

 

[normore]

Use the stock positive and negative terminals (4 & 5) for positive to each of the two pumps. Run both pump grounds (minus) to the hanger and run a wire from the hanger to chassis ground

 

[cwtt]

Use the stock positive and negative terminals (4 & 5) for positive to each of the two pumps. Run both pump grounds (minus) to the hanger and run a wire from the hanger to chassis ground

normore is correct. See the diagram below:

 

[GTE_SC3]

Alright thanks, I will see what i can do. my gas tank is metal, an has a metal lid so this might an might now work. I will let you guys know how it turns out..

thanks for all the great info.