Supra Forums banner

1 - 11 of 11 Posts

·
SupraForums Sponsor
Joined
·
1,020 Posts
Discussion Starter #1 (Edited)
Hi everyone! We have another exclusive product in our new parts store.

Here is the link (the panel is at bottom of the page):
http://www.speedforsale.com/newparts/index.php?cPath=26

Over the last few years, we have been making one-offs of these glove box panels on cars we build, and due to popular demand we are now mass producing these top quality laser cut panels in ANY configuration you need! Their fit and finish is so precise that they simply 'snap' into place, using the bottom valley and upper corners of the glove box to easily hold it in place with NO permanent mounting hardware or adhesives to apply! Each panel is custom made to your specifications of which controllers (VPC, S-AFC, boost controller, etc), gauges, switches, or anything else you want mounted, and include mounting hardware solutions for each item you need mounted.

We can also engrave any designs, logos, switch designations (ON/OFF, Nitrous Armed, etc), or anything else you desire at no extra charge. When engraving, we can either lightly etch the panel so the color is the same as the surface area, or engrave deeper to reveal a white or other background color. We have many different surface and middle layer colors available at no extra cost (see last picture below for a list of color combonations we offer!)

For an extra fee, we can send you a piece of faux-leather to wrap the panel in, or we can do it for you. Also, we offer the panel without our company logo engraved for an extra fee, contact us for details. Or, you can buy a panel with NO holes or mounting solutions cut for $15 less.

When ordering, please note the height, width, and depth of each component you want mounted so we can cut it to fit. Considering these are custom made-to-order, please allow several days for your panel to made and shipped to you.

NOTE: The next-to-last picture below is of one of our old hand-made panels wrapped in faux-leather with a VPC, EVC, and S-AFC2 installed just to give you an idea of what various options might look like!

The base price is $175 with FREE shipping. The price may be adjusted higher or lower in the near future depending on how much time is involved helping people measure their controller sizing, choosing options, and how much time is involved in general. You can order by calling us at 770-777-4774, or placing an order on our web store.









 

·
Registered
Joined
·
2,240 Posts
hhhhmmm
nice there mang!!!

we will be hitting you up here in the future real soon
 

·
'93 Supra TT
Joined
·
480 Posts
this is great. I am definitely thinking about calling soon.
 

·
Registered
Joined
·
428 Posts
How do people usually back these to support the hardware?
 

·
SupraForums Sponsor
Joined
·
1,020 Posts
Discussion Starter #7
How do people usually back these to support the hardware?
I'm not sure what your question means, but I think you are asking how the hardware is held in place. If so, there is a retention plate behind the hardware with studs and nuts that hold it in place, similar to most gauge mounts (autometer, etc).
 

·
LD President
Joined
·
502 Posts
sorry to go off topic--

Jeremy, do you guys carry rear seat deletes too (like wotm and rwmotorsports) if so, id just like to order everything all together.

Thanks,
Mike
 

·
SupraForums Sponsor
Joined
·
1,020 Posts
Discussion Starter #9
sorry to go off topic--

Jeremy, do you guys carry rear seat deletes too (like wotm and rwmotorsports) if so, id just like to order everything all together.

Thanks,
Mike
Mike,
Actually, no we don't. I wasn't aware of a kit like that. If you know who the manufacturer is, I can possibly get a wholesale account started with them and then have the item drop shipped to you if it will make things easier for you to pay all at once. Thanks!
 

·
SupraForums Sponsor
Joined
·
1,020 Posts
Discussion Starter #10
We now have configurations for several different controllers, gauges, and other items. Please note that if you need something mounted that we do not have measurements for, if you send the unit in for us to measure and return you will get a nice discount on the price! See ya.
 
1 - 11 of 11 Posts
Top