[SealSupra-6]

K guys before my car would not start right because I had it in the blow through set up. I fixed it and it ran. I wired in a autometer A/F guage today and now the car starts but then the idle just drops until the car stalls out. I already checked all the intercooler clamps. Do you guys think it is my blow off valve? I also did hard wire a walbro fuel pump in because I did not have the right install kit. Can this also be the problem? :wtflol:

 

[SealSupra-6]

K guys I got it. It was the fuel pump wire connection. Reconnected the wires and the car seems to be fine.

 

[TOPEND]

did u put them in backwards?
the polarity

 

[SealSupra-6]

No because the car was running when I first ran the car around the block. After I shut off the car and tried to restart it it would just start and then idle for like 5 seconds then die. I just went back and retighten the wire connectors.