[Tampa mike]

About to start converting my car over to a single and wanted to see if anyone knew what the exact size and pitch the oil feed fitting was for the block

Just seeing if it was the standard import 1/8th BSPT or not, just dont want to be missing anything



thank you

 

[Supradedupra]

It's not 1/8th NPT.... it's 12x1.25 for both oil fittings (the one you need to block, and the one you need to turn into an -AN fitting for the feed).

 

[Tampa mike]

It's not 1/8th NPT.... it's 12x1.25 for both oil fittings (the one you need to block, and the one you need to turn into an -AN fitting for the feed).

thank you very much

have a link or a place to get one other than like summit

 

[Supradedupra]

I'm running a -4 feed also, so I bought the Earls fitting (-4 to 12x1.25 ) from Summit.

You could always try boost logic

http://www.boostlogic.com/xcart/product.php?productid=113&cat=51&page=1

 

[2JZA70Claou]

Just get an oil feed/return kit. They go about $180 USD