Supra Forums banner
1 - 2 of 2 Posts

· 25psi Bliss
Joined
·
1,534 Posts
There is(are) a 1/8NPT port plumbed right into the oil galley already on the block. There is definetly one immediate to the power steering pump, then there is another by the oil dip stick tube. Either can be used as pressurized oil feeds.

HTH,
Howard.
 

· 25psi Bliss
Joined
·
1,534 Posts
go to you local hardware store and get a 1/8NPT *T * adapter...

If I grasp the overall picture of what you're attempting to do, which is to turbocharge your GE motor, then this obstacle should be the least of the feat that's ahead of you.
MHO, this project is way above you capabilities - just MHO.

Howard.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top