Supra Forums banner
1 - 4 of 4 Posts

· Just some guy
Joined
·
2,852 Posts
Discussion Starter · #6 ·
Well, I started off with my dremel and an 80 grit sanding wheel. It's not the sanding cylinder, it looks kinda like a wire wheel in that it has about 50 sheets of sandpaper arranged in a circle. I have no idea what it's called. That got most of the flat parts. To get into the nooks and crannies I used a cone shaped stone bit on the dremel. Then I started off w/ some 220 grit sandpaper and wet sanded it. It was a real bitch smooting out the bends where I hit it with the stone, as it leaves some nasty marks. Then stepped up to 320 grit, 400 grit, 1000 grit, then 1500 grit. fingerips get really sore at this point. Then put it on my bench grinder with a polishing wheel and polish compound. Finished it off with some mothers polish.

Took about a week of doing it on my spare time after work.

It wont be on my car for a while, but here is what it's going on:

Christian
 

· Just some guy
Joined
·
2,852 Posts
Discussion Starter · #19 ·
WOW man! that looks awesome! what kind of color theme u going with in the engine? all black and polished?!
Thanks for the compliments guys! I'm pretty much sticking to only black/silver/polished. No colors unless I have to (like the magnecor wires). I'll take some more pics when I get done assembling the engine. It may be a while, tho. Going on over a year already!

Christian
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top