[Guest]

I am liking the CCW's very much because of the big wheel combo: 18x10f, 17x11.5r. They have custom offsets to fit perfectly within the stock modified body (not wide body).

I want to see pics of other options of these BIG wheel combo with custom offsets. I think HRE, FIKSE will do custom offset?

Please post pics and the size and offsets please. And also the tire size also

Thanks,
Kaz

 

[Guest]

In another word, which wheels can I get the 285f and 315r?

 

[banton]

This is a crappy pic, but you can see that the rears sit flush with the rear quarter. They are 18x11" HRE 540's with AVS 295's. I could go to a wider tire, but I prefer clean look of this tire/rim combo.

Brad

 

[GwailosuprA]

what offset/rim size is best to make flush? I like a flush tire but want a lip (not monster, but noticeable)

not to jack thead but..

right now im running stockers and they look sortof lacking on my lowered dawg they sit in too far and I'm looking to go 18" prefferably gunmetal or black w/polished lip.

//gwailo-

 

[Kandy suprA]

 

[Guest]

Brad,

what size wheel and tire are you running up front? What offset is your rear? Do you have anymore "higher" resol. pics?

Kandy,

Looking good!! What size and offset is that? How do you think those wheels with fit my stock bodied dawg ?

Thanks the replies! But I want MORE

Kaz

 

[banton]

Brad,

what size wheel and tire are you running up front? What offset is your rear? Do you have anymore "higher" resol. pics?



Kaz

Kaz,

I think I have some better pics on my other laptop and will check later. As for the front, I am running a 9.5" wide front with 265's. I haven't done any fender rolling or wheel well modifications either Unfortunetly, I don't actually know the offsets. I am not the original owner of the wheels, but the original owner had them on his show car with an offset that allowed for a larger aftermarket brake set-up.

Brad

 

[Guest]

No one else running 10" front and 11.5" rear ?

 

[Kandy suprA]

Brad,

what size wheel and tire are you running up front? What offset is your rear? Do you have anymore "higher" resol. pics?

Kandy,

Looking good!! What size and offset is that? How do you think those wheels with fit my stock bodied dawg ?

Thanks the replies! But I want MORE

Kaz

thanks. i no longer own the car though. they were 10.5" wide fronts, 12.5" wide rears. +44 offset front, +25 offset rear. wheels wont fit on a stock body with out heavy modification.

 

[GwailosuprA]

18x9, 18x10 +37 front, +43 rear

Is that a good offset and wheel width to get me the desired look im going for? Flush with a good hearty lip? It is the way they sell them as "supra" rims @ hpf and mvp? Should the offset be any less than that?

thanks

EDIT: Oh yeah Volk GT-N's gunmetal (I know they are played but they are so damn sexy!)

//gwailo-

 

[Guest]

GwailosuprA

I had a blitz 03 wheel for "supra" offset but they were less than flush against the fender. I could have put an inch at most in the offset and it would have been flush but I have rolled rear fenders so...

Any other pics ?

 

[snausa]

http://www.imagestation.com/picture/sraid89/p2768a579cfa2d254086ba9caf21264f3/fa7f56d7.jpg


I wanted a clean fit without modifying the stock body ...
Front - 265s on 9 inch wheels w/ +47 offset
Rear - 285s on 10 inch wheels w/ +48 offset

 

[houstonT]

My old white 98 - Fikse FM/5

 

[houstonT]

My old 95 - Kinesis K58

 

[houstonT]

My old 98 - Fikse FM/5 Profile

 

[Guest]

Peter thanks for pics.

do you remembe what size and offset you were running for each of your former cars?

Thanks again.
Kaz

 

[houstonT]

I have NO clue what the offset was. Fikse and Kinesis just gave me the "supra offset" and assured me that the tire size I intended to run would fit.
Peter

 

[flipNsupra]

heres mine!....

 

[flexysteve8]

mine

 

[jdawg95]

Here ya go. 19s. Tires were 295, sometimes 285/35/19.