Supra Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
402 Posts
Discussion Starter · #1 ·
can someone help me out by posting a pic or diagram of how the vac lines to that little box off of the power steering pump are supposed to go, I recently took off my intake manifold and throttle body and now I can't put it back together. Please help!!

Thanks,
Michael
 

· Banned
Joined
·
564 Posts
You have two vac lines, one long and one short. Short one goes to TB, long one to the side of the intake manifold. When installed, short one coming out of TB can only reach one nipple of the plastic thingy, just install long line into the other end. Makes sense?
 

· Registered
Joined
·
402 Posts
Discussion Starter · #5 ·
thanks guys, the reason why I was confused is because the guy replaced all the vac lines with aftermarket vac lines and they are all the same size. Trust me its been a mess fixing that. So there are 2 nipples on the connector and the short one goes to TB and the longer one goes to the side of the intake manifold, Right??
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top