Question to Blitz Wheel Owners
1 - 2 of 2 Posts
D
Dev
·Guest
Joined
·
0 Posts
I think you mean Hub Centric Ring. 
I don't remember seeing one on my Z1's.
I don't remember seeing one on my Z1's.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Misfire issue, need some advice.
MKIV TechnicalNote: Car was perfectly fine before it’s last wash getting it ready for a photo shoot.(engine bay was sprayed with water). So I’m driving to the photo shoot location and I start noticing a misfire. The longer I drove it progressively got worse to the point where I would just get pretty good...- 0
- 39
-
JustA2jz · updated
-
2jzgte vvti head porting, opinions please
MKIV TechnicalHi everyone, I’ve been reading supra forums for months and months now. Love this page, and this is my first post. I’m about to port my vvti head and I have some questions pertaining to the valve guides. So, assuming my guides are within spec (it’s a low mile motor), what are your professional...- 1
- 93
-
2JZ GT86 · updated
-
Banjo bolt on fuel pump won't budge - ok to use impact wrench?
MKIV TechnicalGreetings, I'm having trouble removing the banjo bolt on the fuel pump assembly. Tried everything I could think of besides an impact wrench. Wanted to ask some folks if that was a good idea or not? I'd really appreciate any insight you can offer. To be clear and avoid miscommunication I found...- 1
- 62
-
shifting problems on automatic supra 2jzgte 330 hp
MKIV TechnicalI have some shifting problems on this supra with a 2jzgte and a automatic box attach, as my knowledge is limited on automatic as i have worked most on manual cars, i really need som help, i have taken a video of the problems, there is no error codes stored on the ecu.. i have heard that the...- 2
- 242
-
Oil Pump Install Questions
MKIV TechnicalSo, long story short..putting my new engine (2JZGE na-t) together and got it almost ready to put back in the car. I realized that I did not install the 2 alignment dowels for the oil pump that go in between the pump and the block. I have everything on the engine and its ready to go in back in...- 7
- 208
-
jmcboost · updated
Join now to ask and comment!