Supra Forums banner
1 - 1 of 1 Posts

· On the edge of adhesion..
Joined
·
754 Posts
You might loose a little in the low end but you'll definately make up for it in the top end. Our motors can spool it, you just may need a little juice to get you out of the hole. I have a 1.01 A/R with no NOS and full boost (30 PSI) comes on at about 3200 RPM for me. It all depends on how you want your car to perform and what your assisting mods are as well. Good luck!

Khris
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top