quick avcr question
1 - 5 of 5 Posts
BurnMac42 said:
if i remember that right that is for an external wastegate. if you have an internal gate use the other one. never used an external gate so not sure why it matters, but the compressor nipple goes to the corresponding nipple on the avcr valve actuator, and the other nipple on the wastegate actuator goes to the other avcr valve nipple.
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
Trying to buy a MKIII
MKIII (1986.5-1992)Hey guys my names triz I’m looking to buy a 1989 Toyota Supra turbo 155k (automatic..... I know I know, but I can’t find a 5 speed not even N/A my plan is to do a 5 speed swap myself) I was hoping for some help I don’t exactly know what I should be looking for, and I was hoping you guys could...- 8
- 151
-
SupraTriz · updated
-
anyone remember this sound clip i made?
MKIII (1986.5-1992)i was searching for it and couldnt find it, only could remember the file name i saved it as. so i searched google for "mark7m001" first result was.... http://www.phonezoo.com/ContentProfile.do;jsessionid=DD5E829BA526D565A2A4B8A1159571E9?id=84412809 someone made it a ringtone! named "crunk...- 21
- 865
-
Mark 2JZ · updated
-
Mk3 supra 2jzget knocking after rebuild
MKIII (1986.5-1992)Ok guys I got my block back from rebuild, Cp pistons 10:1 .020 over, stock rods, standard rod bearing, stock head, arp studs. 1.5mm cometic hg. 2jzge head got new valve seals put in. I got everyting put together and it fired up. When it idles and rev up, no knocking or tapping noise, but...- 11
- 235
-
Want to get into MK3's, need help planning
MKIII (1986.5-1992)If for whatever reason you don't wanna read, the actual questions are underlined. Hey all, I've been wanting to get a MK3 for quite a while now. Personally just like the 80's body style more (and hey, it's cheaper :D). I have a couple of questions, first to start is that I do want to get a...- 8
- 193
-
maur-pwr-bb · updated
-
7mgte smoking
MKIII (1986.5-1992)1988 mk3 Supra 7mgte auto, almost 120,000 miles Runs good but smokes very bad especially after boost. New head gasket and had the head redone and machined 1000 miles ago. compression tested and 5 were 150-180 psi and the 1st cylinder was 120 psi being the lowest. So my question is what could...- 5
- 88
Join now to ask and comment!