Supra Forums banner
1 - 1 of 1 Posts

· Registered
1987 7MGTE
Joined
·
619 Posts
I did both of my spherical bushings on the car using sockets and that C clamp looking loaner tool from AutoZone. You always want to press on the outer shell of the bushing. Both of my spherical bushings were clicking when I raised a rear tire and rocked it back and forth from the upper forward lower rear positions. I first thought the wheel bearing was going out, but by putting my hand over the spherical bushing, I could feel the play when I rocked the tire.
 
1 - 1 of 1 Posts
Top