Supra Forums banner
1 - 4 of 4 Posts

· I pretend to be fast
Joined
·
948 Posts
Discussion Starter · #1 · (Edited)
First let me say that I did search, but came up with nothing. I found a few threads about the sensor but not removing it.


My question is: how do you remove the crankshaft position sensor? Is it and easy thing to do? I found where the sensor location (front lower side of engine on the passenger side) but Im not sure how to remove it. If anyone knows a simple way to do this then please chime in. If anyone has a like or anything, that would be great.

Thanks for any and all help.
 

· I pretend to be fast
Joined
·
948 Posts
Discussion Starter · #3 ·
Thanks ranger, that gives me a good idea of where everything is located, but I was looking for more of how to actually remove the sensor.

Bump for any more ideas?
 

· I pretend to be fast
Joined
·
948 Posts
Discussion Starter · #5 ·
Cool, Ill try that later when I get home. It doesnt look like it is hardwired, Im pretty sure I followed it to the clip where its connected.

Is it nessesary to remove the alternator?
 

· I pretend to be fast
Joined
·
948 Posts
Discussion Starter · #7 ·
This might sound like a dumb question,
-but when you put the new crank sensor in should you grease it up first or no?

-When you put it back in I know you should be careful doing so and not bang it up on things around it but does it matter if it does happen to touch things on the way in while passing by? I just dont wanna do it wrong so thanks to anyone that knows.

-Derick
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top