resurfacing a Mueller flywheel
Join the discussion
Recommended Reading
-
Banjo bolt on fuel pump won't budge - ok to use impact wrench?
MKIV TechnicalGreetings, I'm having trouble removing the banjo bolt on the fuel pump assembly. Tried everything I could think of besides an impact wrench. Wanted to ask some folks if that was a good idea or not? I'd really appreciate any insight you can offer. To be clear and avoid miscommunication I found...- 15
- 260
-
manual switch on auto tranny
MKIV TechnicalThe MANU switch. Is this an on/off switch? Or just a push switch / momentarily switch?- 11
- 647
-
Arnout · updated
-
shifting problems on automatic supra 2jzgte 330 hp
MKIV TechnicalI have some shifting problems on this supra with a 2jzgte and a automatic box attach, as my knowledge is limited on automatic as i have worked most on manual cars, i really need som help, i have taken a video of the problems, there is no error codes stored on the ecu.. i have heard that the...- 5
- 323
-
Steering box
MKIV TechnicalHe, I have an issue with my supra mk4, The steering doesn’t response in same time, i mean when i turn right or left I don’t get response immediately. I have to take half turn then the car will turn. What can i do instead of buying a new steering box!- 2
- 95
-
a7med_mk4 · updated
-
Rusted crankshaft/gear/pulley - cleaning?
MKIV TechnicalHey guys, I removed my broken harmonic balancer, which was really a bitch to get off. I noticed some small rust and other rough patches on the crankshaft (especially around the key) where the balancer sat. The timing gear is even worse. Ruined my pulling tool half way, so I now first have to...- 3
- 112
Join now to ask and comment!