Supra Forums banner

1 - 2 of 2 Posts

·
Turbonetics..faggot asses
Joined
·
1,062 Posts
Discussion Starter #1
Will setting base timing to 8 or 9 degrees BTDC buy me a few more PSI before Knock occurs without adversly affecting my low end power to much. My SAFC is set to -9% on the high end but I'm hitting FC at like 18psi at 5000rpms, If I set it to -12 it starts to knock at that same spot. No leaks in intake
 
1 - 2 of 2 Posts
Top