I am considering purchase one of these units. On paper it seems like a great unit....anyone wanna give me some real world experience? Also what is the difference between the SAFC and the SAFC II? Thanks
i just finished installing my SAFCII about an hour ago, i was playing with it. I have installed 2 SAFC's before and set them up. For the extra couple bucks the new feautures are worth it. The knock sensor monitor is a nice feature. I held out and got the II, Its worth it if you can find a deal.
Firstly, it's original, I'm the 3rd owner, speedo says 187k miles. Runs good, brakes good. Some power steering belt squeak.
Here's what I know is wrong with it and some parts are en-route already:
It’s got an oil leak or power steering leak, I can’t tell which probably both. Need to de-grease...
Ok guys I got my block back from rebuild, Cp pistons 10:1 .020 over, stock rods, standard rod bearing, stock head, arp studs. 1.5mm cometic hg. 2jzge head got new valve seals put in. I got everyting put together and it fired up. When it idles and rev up, no knocking or tapping noise, but...
Rebuilding my 7M. It all started with turbo oil seals leaking, and from there to full build
I’m on one of the things that I’m changing is the oil pump considering my stock Pump has close to 120k
Since I can’t find the pump spring kit which includes the secondary internal spring and shim