Hi, car's basically BPU, DP, dropin air filter, BCC, and just installed EVC4 running TTC. I noticed that my car idles rough now even after trying to adjust the idle. What could be causing rough idle? I don't think I have a boost leak cuz I can boost to 17psi, haven't tried higher, and vacuum is pretty steady at 20psi.
Rough idle?
1 - 4 of 4 Posts
Joined
·
652 Posts
What type of spark plugs do you have? If you got the ever popular NGK 3330's, the rough idle is normal...Darshana S...
1
1/4mile in style
·Guest
Joined
·
0 Posts
Ain't that the truth....
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
LSD recommendation?
MKIV TechnicalI have been out of the scene for 8 years or so, and my '95 MKIV has been in storage for the last 6 years or so, but I am getting ready to bust her back out and get the beast rolling again. That said, when I put it in storage I knew I needed a LSD due to the turbo upgrade I gave it... but now the...- 14
- 355
-
Overheating issue
MKIV TechnicalSo over the winter I installed a new mishimoto x-line radiator and the mishimoto dual fan shroud with fans, and a derale dual fan controller. It was great and didn’t overheat until the temperature started getting warm outside. Now driving on the freeway @ 70mph it’s starting to overheat. I’ve...- 19
- 266
-
NTLONUF · updated
-
New Wheel & Tire fitment guide.
MKIV TechnicalPlease send me an e-mail if you would like a copy of the spreadsheet. [email protected] Later, Steve- 1K
- 236K
-
Steve Jarvis · updated
-
Aem v2 auto 02v02 conversion to 01v24 fuel pump issue
MKIV TechnicalHello there, Conversion from 02v02 to 01v24 - after that fuel pump stop working If i go back to 02v02 works just fine Another thing - on 01v24 - If i plug only A ecu connector, pump works, but when i plug B ecu connector just stops Please help Thanks in advance- 0
- 17
-
Coolant temp gauge sensor
MKIV TechnicalSo my on my 1993 supra with a 2jzgte, the temp gauge on the gauge cluster, just pinned to High. Even when the car is only warm. I unplug the single pin sensor and it drops back to cool. I ordered a new sensor and tried to install it, but the sensor threads are just a little to big for the...- 0
- 39
-
supratwnhks · updated
Join now to ask and comment!