[Talisman013]

What is the best location to run a 2 gauge wire thru the firewall in a MKIV supra?

 

[!blksupra!]

under the driver side. High left.

 

[Deusdeceptor]

^^^ what he said. Best way to do it is get a small cord, tape and tie the 2 guage wire to it, and just run the cord through the firewall...then pull the 2 guage wire through....

 

[xbbsupra]

Should be no problem, I ran a 0 gauge through the firewall.

 

[minguezCD]

Should be no problem, I ran a 0 gauge through the firewall.

ditto - i tried outside in my first MKIV...but inside worked much better on my second

 

[TylerTheToaster]

There's a hole on the passenger side as well that I ran a 2 gauge through.

 

[Cordeez]

^more descriptive please.

 

[97JZA80]

Well not sure about passenger side but if you pull the drivers side fender liner there are 2 big holes. Since its drivers side you will also be closer to the battery which is always a plus. They have yellow rubber covers and are perfect for your power cable..I have a 0 through mine.