Supra Forums banner

1 - 3 of 3 Posts

·
At My Signal Unleash Hell
Joined
·
820 Posts
Discussion Starter #1
Hello,

Any of you know when is a safe timing under boost? I'm monitoring my timing and I want to keep turning the boost up but I want to make sure that mi timing stays in a safe range. I have lots of fuel but I want to make sure the ECU doesn't see any knocking.
Thanks

--Oliver
 

·
Registered
Joined
·
951 Posts
it all depends if you are knocking or not. are you using the aem ems? if so, you can change the timing map at the point you start to see excessive knock. if not you would have to retard at the distributor, but loose timing through the overall map
 

·
At My Signal Unleash Hell
Joined
·
820 Posts
Discussion Starter #3
it all depends if you are knocking or not. are you using the aem ems? if so, you can change the timing map at the point you start to see excessive knock. if not you would have to retard at the distributor, but loose timing through the overall map
Nah, I'm using stock ECU. I use a TechTom to monitor the timing. Stock ECU will retard timing when it starts to see knock.. so I want to see whats safe under boost.

--Oliver
 
1 - 3 of 3 Posts
Top