8
87Tmk3
·Guest
Joined
·
0 Posts
Do they make a set of rad hoses for the 7M? I checked there web site, the only thing listed is the JZ motors.
Dave
Dave
Samco hoses
Join the discussion
Recommended Reading
-
https://www.powerhousesupplement.com/ultra-fit-keto/
MKIII (1986.5-1992)It is a extremely good concept to bake bread to your very own, primarily based on sourdough and the use of wholegrain, non-wheat flour, but not anyone has the opportunity. Whole-grain and whole-wheat cereal merchandise from flour other than wheat ought to be blanketed in the slimming food...- 0
- 19
-
limgdqzc · updated
-
MK3 oil pump mod
MKIII (1986.5-1992)Rebuilding my 7M. It all started with turbo oil seals leaking, and from there to full build I’m on one of the things that I’m changing is the oil pump considering my stock Pump has close to 120k Since I can’t find the pump spring kit which includes the secondary internal spring and shim I’ll...- 2
- 46
-
So I picked up a 91 in decent condition...
MKIII (1986.5-1992)Firstly, it's original, I'm the 3rd owner, speedo says 187k miles. Runs good, brakes good. Some power steering belt squeak. Here's what I know is wrong with it and some parts are en-route already: It’s got an oil leak or power steering leak, I can’t tell which probably both. Need to de-grease...- 93
- 2K
-
pham · updated
-
Mk3 supra 2jzget knocking after rebuild
MKIII (1986.5-1992)Ok guys I got my block back from rebuild, Cp pistons 10:1 .020 over, stock rods, standard rod bearing, stock head, arp studs. 1.5mm cometic hg. 2jzge head got new valve seals put in. I got everyting put together and it fired up. When it idles and rev up, no knocking or tapping noise, but...- 43
- 2K
-
W58 swap question.
MKIII (1986.5-1992)I have read the sticky born an auto swap in manual. The one question I have is, do I need to do any cutting for the slave cylinder or cutting for the shifter to line up?- 14
- 223
-
Chocolate Cowboy · updated
Join now to ask and comment!