Supra Forums banner
1 - 2 of 2 Posts

·
When cars say, "NO MORE!"
Joined
·
2,112 Posts
Discussion Starter · #1 ·
I notice people ask the question is my headgasket blown more than they should. Most people say do a leakdown/compression test but both of these tests can require tools not available or expensive. That and the fact that they do not yeild definate results.

This is a chemical test tool that tests whether hydrocarbons are in your coolant system which is definately the first thing you should do and usually the only thing needed to check for a bad head/headgasket. If there are hydrocarbons in your cooling system, 9.5/10 you either need a head or a headgasket.

Here is the snapon tool I use.
http://buy1.snapon.com/catalog/item...-store&tool=all

Its 65 bux and is a very simple test to do which only take ~ 10 minutes if you are being very slow. It is also very easy to do and comes with detailed instructions that are easy to follow.

Here is the Mac one for $45
http://mactools.com/ProductDetails.aspx?ItemNum=BT500A

I have not used it so I can not guarantee if it is as good and/or as accurate but it should be.

I would definately have to recommend the snapon one though since I have experience with it.
-SJ aka SJ's Headgaskets
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top