Supra Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
326 Posts
must play around with it
that what happen to me when i took it off to put some glow gauges in.
you have be prepare to take it off many i mean many times to get it right again.
the needle should be laying at zero, now turn the needle a from left to right.... once it reach 160, keep turning till you feel some resistance, and keep turning but slowly... until prob. an inch from 160mph and release. it should go back to zero, then plug everything back and put few screw in to hold the cluster down and drive it to see if it is correct. if not keep trying.
that is all i could say.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top