Still looking to buy some black cloth MKIV seats

1 - 1 of 1 Posts

Steve Theodore

Administrator

Joined Dec 17, 1999

17,241 Posts

Discussion Starter • #1 • Dec 4, 2001

Posting here because I know that many NA's come with them. I want to buy your NA cloth seats, so if you're looking to swap to leather or whatever, please e-mail me privately at [email protected]

Thanks!

Steve T.
1995 Supra TT hardtop

1 - 1 of 1 Posts

Recommended Reading

2JZ-GE NA Running 14:1+ Compression

Naturally Aspirated

We are building SC300 with a 2JZ-GE NA for a Bonneville Land Speed record attempt. We're working through all the engine mods including a lot of head work. Based on the regulations we will need to run VP Racing Fuel C14. Possibly C14+ but it's unclear if that will pass tech. Does anyone have...
- 9
- 349
- N
  nick430 · updated 3 d ago
IP Hexa Pac Ignition coils

Naturally Aspirated

So I am considering doing the COP conversion and not messing with the dizzy at all during an NA-T install. I just so happened to stumble upon these and couldn't find any info or anyone that had used them in the search...
- 1
- 91
- TougeSC3 · updated 5 d ago
IS300 Coil Pack brackets for NA Supra?

Naturally Aspirated

Hi supraforum'ers, Does anyone know where I can buy some simple brackets that secure the IS300 coil packs in our non-vvti 2JZ-GE engines? I performed this coil pack conversion from a distributor cap and am planning a road trip, so I prefer them to be bolted down in a secure manner. :)
- 3
- 169
- W
  WarIsHate · updated 5 d ago
Fluidampr Crank Pulley = -2 degrees mark?

Naturally Aspirated

Hi guys (and gals?), I’m in the process of upgrading my timing belt and crank pulley. When I aligned the bolt hole notches and overlaid my new Flyuidampr crank pully over the oem 2JZ-GE (non-vvti) one, the Fluidampr’s timing mark was at -2 degrees inline with the oem crank pulley’s white...
- 4
- 151
- W
  WarIsHate · updated 7 d ago
NA-T high increasing idle after IS300 coil pack conversion AEM v1

Naturally Aspirated

Hi Supraforum'ers, Has anyone experienced a high idle 2500 rpm + (that keeps increasing) after you converted from distributor to the IS300 coil packs with AEM EMS v1 (or similar engine management system)? I set the base ignition timing with AEMPower's wizard, and made sure the throttle body...
- 2
- 148
- W
  WarIsHate · updated 9 d ago

Top

Still looking to buy some black cloth MKIV seats

Steve Theodore

Administrator

2JZ-GE NA Running 14:1+ Compression

IP Hexa Pac Ignition coils

IS300 Coil Pack brackets for NA Supra?

Fluidampr Crank Pulley = -2 degrees mark?

NA-T high increasing idle after IS300 coil pack conversion AEM v1