Supra Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
641 Posts
BARTON said:
Oil pressure is determined by how you set up the clearance on the bearings. I have 4k on my new motor and am running 10-30 Amsoil. Pressure cold is about 95 psi. Warm idle is 32 psi. Bearings were set at spec. You are all okay. Can't build two motors with exactly the same oil pressure. Will always vary some IMHO.
Thank you..........
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top