Other people have posted on this subject before.The front STB seems to make a difference with and without the roof off.A little less "shake" over bumps.The TRD-STB[flat wide bar] might not clear a single set-up depending upon the turbo housing size.The Cusco/Greddy[round tube] style should be no problem.
Thinking 362 or 364.5 with the 0.83 divided or AGP Turbo 0.68 open turbine housing. I will be running 91 octane pump gas. I've been running the car at ~450whp through the factory auto and am switching to a 6R80 which should help the WHP numbers (more efficient design, locking converter). I'm...
I just installed a new s362 sxe with 68mm turbine .88ar open to replace my pte 5857. my setup is stock engine and cams. I dont see any positive boost until 4000rpm where it starts making 2-3 psi.It feels way laggy and unresponsive.Is that normal for that size? what rpm does it start spooling on...
I have a set of these waiting to be fitted
Do I still need to use them oem washer / seals x 16 when fitting the bolts/nuts on OCD valve covers?
I sent an email to OCD asking the above but not got a reply back
Just wondering if anyone on here that has a set can confirm this for me.
A few forum members brought to my attention there isn't much of a definitive list of discontinued parts for the MKIV.
The purpose of this thread is to list out any known or omitted parts without much discussion other than just that. If not sure if something is discontinued, message me and...