Yeah i have they sold me my electric fan and yes i would recommend them they are very prompt and responsible. They are actually the guys that run this board too. I plan on getting my accessory pulleys and the gates belt from them also as soon as i get my money to play with in a bit.
jeff at suprasport.com is a great guy. He has a daytime job in addition to the site(thats why there is no tel #). he has great prices and is very reliable. if you want it he can get it for you.
p.s. i have bought a few fpoducts from him.
Ok 'm performing m swap over the next two weekends and wanted to make sure I have everything that i am going to need. My question is which fan shroud do i need? I have read some things saying to get the TT upper shroud, but the little helper fan or fans won't work because there is no plug for...
I just got my return fuel system finished up and am having an issue with setting fuel pressure. I ran a Walbro 525 pump with an 8an feed and 6 an return. FuelLab regulator on the return, with a Radium Engineering gauge. All parts high quality. I can't get the gauge to read past 20psi. The car...
I am running a full aristo swap in my is300. I have been using my stock IS ECU and piggybacked for adjustments.
I stumbled across apost that says that I will fry my ecu if I 'm using low impedence injectors. I know that they are 440cc's from an aristo. I also know that my N/A ECU thinks its...
Hi guys (and gals),
Is my understanding correct that the check valve that connects the charcoal canister to that port on the throttle body should only flow into the throttle body and NOT back towards charcoal canister?
Greetings Supraforums Team,
I tried to test my 2JZ-GE charcoal canoster per service manual instructions, but the 43psi “cleaning” method does not work.
It just locks up and does not allow air flow out the bottom port. Lower pressures work fine ~20psi and less.
Do I have this setup...