Joined
·
916 Posts
Any one here using a t-61 or t-64 turbo. I kinda curious to how they both spool up.
T-61 or t-64
Join the discussion
Recommended Reading
-
Cause of idle rpm above target rpm in AemPower? (Aem v1)
Dyno TuningHi guys (and gals), I converted my 2JZ-GE car to is300 coil packs and am curious why it’s idling so high above the base target in AemPower software (Aem Ems v1)? Yes, I reset base timing with a timing light using AemPower’s setup feature. What are typical reasons for this not caused by a...- 3
- 123
-
ECUmaster EMU black vs Haltech vs PROefi
Dyno TuningHey guys! Been out of the Supra game for a little, but getting back into it and wanted to see what you guys recommend or are running on your cars. I'm about to single my car and I'm going ahead and doing everything at once (turbo kit, FMIC, fuel system and standalone). Are any of you running the...- 5
- 387
-
twntrbo03' · updated
-
Dual Solenoid Boost Controller for AEM v1 or Greddy Profec B solenoids upgrade?
Dyno TuningMy Greddy Profec B Spec solenoid (dual) does not control boost anymore and I don't know how it works to fix it. This is the original black B Spec, no the B spec II. When this boost controller worked in the past, it was awesome and stable. Does anyone know of a good aftermarket dual solenoid...- 2
- 93
-
In search of a Base Tune Ecumasters Det3
Dyno TuningDoing some research and trying to find a base tune for 1000cc injectors, on Ecumasters DET3-4bar.- 0
- 88
-
JuMk3 · updated
-
Dual chamber/plenum intake manifolds on a 2jz
Dyno TuningHi everybody:) I'm wondering why we don't see dual chamber/plenum intake manifolds on a 2jz so often? it's very common here in Europe with them on the VAG platforms & they claim better results with this type of intake manifolds. Pictures below is an example of the style of manifold I'm...- 13
- 564
-
F E R N A N D E Z · updated
Join now to ask and comment!