[PictureMeRollin]

I was wondering if someone could post a detailed list of ALL parts that are included in the T-78 kit? Down to fittings and lines. Any information would be great! Thanks!

 

[MONSTER]

You are better off if someone scans the installation manual for you, as some of the small parts are very hard to describe.

This is valid for both T78 and T88 kits:

1 turbocharger
1 Type R External wastegate
1 42mm Exhaust manifold (SUS)
1 Wastegate dump pipe - steel
1 Shorty DP 80mm steel
1 IC piping elbow C1 60mm aluminum 120degree 30R
1 Longer IC piping elbow C2 steel 60mm
1 Intake pipe 100mm aluminum
1 Air filter (Airinx)
1 Filter adapter
1 Heat shield bracket
1 Hear shield panel
1 SS braided oil feed line
1 Banjo bolt + appropriate stud for oil line
2 Oil return line pipes (19mm diam each)
1 Adapter union 12mm P1.25-10mm
1 Straight union 1/8PF-10mm P1.25
1 Plug bolt 12mm P1.25
2 Copper washer 10diam, t=1.0 (turbo side)
1 Copper washer 10diam, t=2.0 (engine side)
2 Copper washer 10diam (engine side)
1 Silicone hose 60x70mm
2 Silicone hose 100x60mm
1 Silicone hose 60x65mm (reducer)
1 Silicone hose 60x70mm (reducer)
1 Rubber hose 6x500mm
1 Rubber hose 8x1100mm
1 Rubber hose 12x450mm
1 Rubber hose 19x1250mm (ISCV)
4 Hose band #4 diam 6mm
2 Hose band #8 diam 12mm
4 Hose band #12 diam 19mm
4 Hose band #36 diam 60mm
1 Hose band #40 diam 65mm
1 Hose band #44 diam 70mm
4 Hose band #64 diam 100mm
1 Air pressure hose 600mm
1 Air pressure hose 800mm
2 Straight union fitting 1/8pt-1/8pf
1 Hose union fitting 5mm-1/8pt
1Hose union fitting 6mm-1/8pt
1 Exhaust manifold gasket
1 Turbo gasket IN
1 Turbo gasket OUT
1 Exhaust gasket 80mm
2 Oil return gasket
1 O2 sensor gasket
2 Plug union 10mm
1 Thermo cloth 100mm x 1000mm
5 Tie wraps 150mm

Bolts/studs:

4 M6x25mm P1.0 (Airinx)
1 M6x15mm P1.0 (heat shield)
1 M8x15mm P1.25 (heat shield)
2 M8x25mm P1.25 (O2 sensor)
6 M10x35mm P1.5 (oil return/downpipe)
16 M10x35mm P1.25 (exhaust manifold studs)
2 M10x35mm P1.25 (downpipe)

Note that usually this kit comes with MISSING parts, and dont be suprised f you dont find exhaust manifold gasket or something like that in the box. Anyway, hope this helps.

 

[PictureMeRollin]

You are the man, thank you sooo much!!

If anyone has the time to scan the manual, it would be much appreciated!

 

[John Minert]

Greddy faxed a copy to me. Call them at 1-800-473-3392.

John
www.utahracing.com/supras/john.html

... in the middle of my T-78 install...

 

[gritsak]

Greddy faxed a copy to me. Call them at 1-800-473-3392.

John
www.utahracing.com/supras/john.html

... in the middle of my T-78 install...

that is suprising...when i bought my kit and it didnt have an english manual they wouldnt directly fax me a copy, i had to go through the place i bought the kit from (titan) and have them get me a copy..they were kinda dicks about it at greddy.

 

[MONSTER]

that is suprising...when i bought my kit and it didnt have an english manual they wouldnt directly fax me a copy, i had to go through the place i bought the kit from (titan) and have them get me a copy..they were kinda dicks about it at greddy.

Yup, HKS does the same, to try and kill the "grey market" parts. If your reseller can't get you the manual for any reason, HKS will be happy to fax it over for $5 per. GReddy is just following their example.

The bottom line, stupid manual should be IN the friggin box to begin with.....

 

[C5KILLR]

mine came with it but didnt come with exhuast manifold gasket
so I had to use stock gasket



ken

 

[blackbird]

Ken, are you running a 6spd or Auto?

 

[MONSTER]

mine came with it but didnt come with exhuast manifold gasket
so I had to use stock gasket



ken

All GReddy includes in their box (on a good day!) is the same brand new stock exhaust manifold gasket.