Supra Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter #1
So I'm putting in a new clutch and the works and of course I forget to see which way the T/O bearing retainer spring goes. It is "U" shaped for the most part. It can go either with the bottom of the U towards the fork or 180 degrees the other way. Unfortunately, it seems to work both ways but I know it only goes one way. Help!
 

·
JZS161 Aristo TT
Joined
·
881 Posts
supra_dupra said:
So I'm putting in a new clutch and the works and of course I forget to see which way the T/O bearing retainer spring goes. It is "U" shaped for the most part. It can go either with the bottom of the U towards the fork or 180 degrees the other way. Unfortunately, it seems to work both ways but I know it only goes one way. Help!
Bottom of the u towards the fork :bigthumb:


Link to TSRM
 

·
Registered
Joined
·
38 Posts
Discussion Starter #3
Thanks a lot. That's what I ended up doing. Good thing I guessed right otherwise I still be under the car right now holding the trani on my chest..ha ha
 
1 - 3 of 3 Posts
Top