[supra935]

Here is the time slip:

This was the first run at 1.6kg/cm2.

Big thanks to Mohammad and crew at MZM. Mohammad did a great job driving and tunning the car.,, thanks to Gus for transporting the car down to RCR. Also, thanks to Chris Johnson (Pushrod) for allowing us to use his rims/tires. Happy I am!!!
Sorry for posting this late.


Sincerely
Kirk

 

[TT_6SPD_95]

Here is the time slip:

This was the first run at 1.6kg/cm2.

Big thanks to Mohammad and crew at MZM. Mohammad did a great job driving and tunning the car.,, thanks to Gus for transporting the car down to RCR. Also, thanks to Chris Johnson (Pushrod) for allowing us to use his rims/tires. Happy I am!!!
Sorry for posting this late.


Sincerely
Kirk

Hey, cool run. Do you have a dyno sheet that I could see? The reason I ask is that I saw on your webpage that you are running a cast manifold and I wanted to see how it does on the dyno. Do you think that you would be able to get more out of a header? Thanks

 

[supra935]

Tony,

What's your fax number,, I'll fax it to you.


kirk

 

[TT_6SPD_95]

Tony,

What's your fax number,, I'll fax it to you.


kirk

Could you e-mail it? Here is my e-mail address: Click here to Email Me

I just don't have a fax machine readily available at the time...let me know if you can't e-mail it. Thanks, I really appreciate it.

 

[supra935]

sheet

1.6 kg/cm2 with 75shot
580.9 rwhp
528.1 torque

 

[duniqueone]

hi i saw my dyno chart on the spread sheet.
this dyno was with no tunning at 26psi because i did not have a wide band O2.
i raced a rx7 on the hwy and blew off my tb hose that was 1 leak
then the next day i did a presure test and found 3 more boost leaks. i have fixed then now but last weak i also installed cam's in the car.

do you know what other turbos will mount up to the greddy manifold?

thanks
augie